PHP: Access Array Value on the Fly

I wouldn't bother about that extra variable, really. If you want, though, you could also remove it from memory after you've used it:

$variable = array('a','b','c');
echo $variable[$key];
unset($variable);

Or, you could write a small function:

function indexonce(&$ar, $index) {
  return $ar[$index];
}

and call this with:

$something = indexonce(array('a', 'b', 'c'), 2);

The array should be destroyed automatically now.

How to access an array element without assigning an array variable?

Since PHP 5.4 you can write:

echo explode('@', $var)[0];

In earlier versions of PHP you can only achieve the behaviour with tricks:

echo current(explode('@', $var)); // get [0]
echo next(explode('@', $var));    // get [1]

Retreiving an element at an arbitrary position is not possible without a temporary variable.

Here is a simple function that can tidy your code if you don't want to use a variable every time:

function GetAt($arr, $key = 0)
{
    return $arr[$key];
}

Call like:

echo GetAt(explode('@', $var));    // get [0]
echo GetAt(explode('@', $var), 1); // get [1]

PHP Accessing array values using Object Operator with key

this code work 100% fine

$arr = (object) array(
    'id' => 123,
    'title' => 'Example Title',
);

echo $arr->title;

PHP array's, how to access keys and values

Try this -

$newarray = array();
foreach($shop as $key=>$value) {
    $newarray[$key]['Title'] = $value['Title'];
    $newarray[$key]['Number'] = $value['Number'];
}
echo "<pre>";print_r($newarray);

Here, $newarray will give you output like this.

Array
(
    [0] => Array
        (
            [Title] => rose
            [Number] => 15
        )

    [1] => Array
        (
            [Title] => daisy
            [Number] => 25
        )

    [2] => Array
        (
            [Title] => orchid
            [Number] => 7
        )

)

How can I access an array/object?

To access an array or object you how to use two different operators.

Arrays

To access array elements you have to use [].

echo $array[0];

On older PHP versions, an alternative syntax using {} was also allowed:

echo $array{0};

Difference between declaring an array and accessing an array element

Defining an array and accessing an array element are two different things. So don't mix them up.

To define an array you can use array() or for PHP >=5.4 [] and you assign/set an array/-element. While when you are accessing an array element with [] as mentioned above, you get the value of an array element opposed to setting an element.

//Declaring an array
$arrayA = array ( /*Some stuff in here*/ );
$arrayB = [ /*Some stuff in here*/ ]; //Only for PHP >=5.4

//Accessing an array element
echo $array[0];

Access array element

To access a particular element in an array you can use any expression inside [] or {} which then evaluates to the key you want to access:

$array[(Any expression)]

So just be aware of what expression you use as key and how it gets interpreted by PHP:

echo $array[0];            //The key is an integer; It accesses the 0's element
echo $array["0"];          //The key is a string; It accesses the 0's element
echo $array["string"];     //The key is a string; It accesses the element with the key 'string'
echo $array[CONSTANT];     //The key is a constant and it gets replaced with the corresponding value
echo $array[cOnStAnT];     //The key is also a constant and not a string
echo $array[$anyVariable]  //The key is a variable and it gets replaced with the value which is in '$anyVariable'
echo $array[functionXY()]; //The key will be the return value of the function

Access multidimensional array

If you have multiple arrays in each other you simply have a multidimensional array. To access an array element in a sub array you just have to use multiple [].

echo $array["firstSubArray"]["SecondSubArray"]["ElementFromTheSecondSubArray"]
         // ├─────────────┘  ├──────────────┘  ├────────────────────────────┘
         // │                │                 └── 3rd Array dimension;
         // │                └──────────────────── 2d  Array dimension;
         // └───────────────────────────────────── 1st Array dimension;

Objects

To access an object property you have to use ->.

echo $object->property;

If you have an object in another object you just have to use multiple -> to get to your object property.

echo $objectA->objectB->property;

Note:

Also you have to be careful if you have a property name which is invalid! So to see all problems, which you can face with an invalid property name see this question/answer. And especially this one if you have numbers at the start of the property name.
You can only access properties with public visibility from outside of the class. Otherwise (private or protected) you need a method or reflection, which you can use to get the value of the property.

Arrays & Objects

Now if you have arrays and objects mixed in each other you just have to look if you now access an array element or an object property and use the corresponding operator for it.

//Object
echo $object->anotherObject->propertyArray["elementOneWithAnObject"]->property;
    //├────┘  ├───────────┘  ├───────────┘ ├──────────────────────┘   ├──────┘
    //│       │              │             │                          └── property ; 
    //│       │              │             └───────────────────────────── array element (object) ; Use -> To access the property 'property'
    //│       │              └─────────────────────────────────────────── array (property) ; Use [] To access the array element 'elementOneWithAnObject'
    //│       └────────────────────────────────────────────────────────── property (object) ; Use -> To access the property 'propertyArray'
    //└────────────────────────────────────────────────────────────────── object ; Use -> To access the property 'anotherObject'


//Array
echo $array["arrayElement"]["anotherElement"]->object->property["element"];
    //├───┘ ├────────────┘  ├──────────────┘   ├────┘  ├──────┘ ├───────┘
    //│     │               │                  │       │        └── array element ; 
    //│     │               │                  │       └─────────── property (array) ; Use [] To access the array element 'element'
    //│     │               │                  └─────────────────── property (object) ; Use -> To access the property 'property'
    //│     │               └────────────────────────────────────── array element (object) ; Use -> To access the property 'object'
    //│     └────────────────────────────────────────────────────── array element (array) ; Use [] To access the array element 'anotherElement'
    //└──────────────────────────────────────────────────────────── array ; Use [] To access the array element 'arrayElement'

I hope this gives you a rough idea how you can access arrays and objects, when they are nested in each other.

Note:

If it is called an array or object depends on the outermost part of your variable. So [new StdClass] is an array even if it has (nested) objects inside of it and $object->property = array(); is an object even if it has (nested) arrays inside.
And if you are not sure if you have an object or array, just use gettype().

Don't get yourself confused if someone uses another coding style than you:

 //Both methods/styles work and access the same data
 echo $object->anotherObject->propertyArray["elementOneWithAnObject"]->property;
 echo $object->
        anotherObject
        ->propertyArray
        ["elementOneWithAnObject"]->
        property;

 //Both methods/styles work and access the same data
 echo $array["arrayElement"]["anotherElement"]->object->property["element"];
 echo $array["arrayElement"]
     ["anotherElement"]->
         object
   ->property["element"];

Arrays, Objects and Loops

If you don't just want to access a single element you can loop over your nested array / object and go through the values of a particular dimension.

For this you just have to access the dimension over which you want to loop and then you can loop over all values of that dimension.

As an example we take an array, but it could also be an object:

Array (
    [data] => Array (
            [0] => stdClass Object (
                    [propertyXY] => 1
                )    
            [1] => stdClass Object (
                    [propertyXY] => 2
                )   
            [2] => stdClass Object (
                    [propertyXY] => 3                   
               )    
        )
)

If you loop over the first dimension you will get all values from the first dimension:

foreach($array as $key => $value)

Means here in the first dimension you would only have 1 element with the key($key) data and the value($value):

Array (  //Key: array
    [0] => stdClass Object (
            [propertyXY] => 1
        )
    [1] => stdClass Object (
            [propertyXY] => 2
        )
    [2] => stdClass Object (
            [propertyXY] => 3
        )
)

If you loop over the second dimension you will get all values from the second dimension:

foreach($array["data"] as $key => $value)

Means here in the second dimension you would have 3 element with the keys($key) 0, 1, 2 and the values($value):

stdClass Object (  //Key: 0
    [propertyXY] => 1
)
stdClass Object (  //Key: 1
    [propertyXY] => 2
)
stdClass Object (  //Key: 2
    [propertyXY] => 3
)

And with this you can loop through any dimension which you want no matter if it is an array or object.

Analyse `var_dump()` / `print_r()` / `var_export()` output

All of these 3 debug functions output the same data, just in another format or with some meta data (e.g. type, size). So here I want to show how you have to read the output of these functions to know/get to the way how to access certain data from your array/object.

Input array:

$array = [
    "key" => (object) [
        "property" => [1,2,3]
    ]
];

var_dump() output:

array(1) {
  ["key"]=>
  object(stdClass)#1 (1) {
    ["property"]=>
    array(3) {
      [0]=>
      int(1)
      [1]=>
      int(2)
      [2]=>
      int(3)
    }
  }
}

print_r() output:

Array
(
    [key] => stdClass Object
        (
            [property] => Array
                (
                    [0] => 1
                    [1] => 2
                    [2] => 3
                )

        )

)

var_export() output:

array (
  'key' => 
  (object) array(
     'property' => 
    array (
      0 => 1,
      1 => 2,
      2 => 3,
    ),
  ),
)

So as you can see all outputs are pretty similar. And if you now want to access the value 2 you can just start from the value itself, which you want to access and work your way out to the "top left".

1. We first see, that the value 2 is in an array with the key 1

// var_dump()
array(3) {
  [0]=>
  int(1)
  [1]=>
  int(2)    // <-- value we want to access
  [2]=>
  int(3)
}

// print_r()
Array
(
    [0] => 1
    [1] => 2    // <-- value we want to access
    [2] => 3
)

// var_export()
array (
  0 => 1,
  1 => 2,    // <-- value we want to access
  2 => 3,
)

This means we have to use [] to access the value 2 with [1], since the value has the key/index 1.

2. Next we see, that the array is assigned to a property with the name property of an object

// var_dump()
object(stdClass)#1 (1) {
  ["property"]=>
  /* Array here */
}

// print_r()
stdClass Object
(
    [property] => /* Array here */
)

// var_export()
(object) array(
    'property' => 
  /* Array here */
),

This means we have to use -> to access the property of the object, e.g. ->property.

So until now, we know that we have to use ->property[1].

3. And at the end we see, that the outermost is an array

// var_dump()
array(1) {
  ["key"]=>
  /* Object & Array here */
}

// print_r()
Array
(
    [key] => stdClass Object
        /* Object & Array here */
)

// var_export()
array (
  'key' => 
  /* Object & Array here */
)

As we know that we have to access an array element with [], we see here that we have to use ["key"] to access the object. We now can put all these parts together and write:

echo $array["key"]->property[1];

And the output will be:

Don't let PHP troll you!

There are a few things, which you have to know, so that you don't spend hours on it finding them.

"Hidden" characters
Sometimes you have characters in your keys, which you don't see on the first look in the browser. And then you're asking yourself, why you can't access the element. These characters can be: tabs (\t), new lines (\n), spaces or html tags (e.g. </p>, <b>), etc.
As an example if you look at the output of print_r() and you see:
```
Array ( [key] => HERE ) 
```
Then you are trying to access the element with:
```
echo $arr["key"];
```
But you are getting the notice:
Notice: Undefined index: key
This is a good indication that there must be some hidden characters, since you can't access the element, even if the keys seems pretty correct.
The trick here is to use var_dump() + look into your source code! (Alternative: highlight_string(print_r($variable, TRUE));)
And all of the sudden you will maybe see stuff like this:
```
array(1) {
    ["</b>
key"]=>
    string(4) "HERE"
}
```
Now you will see, that your key has a html tag in it + a new line character, which you didn't saw in the first place, since print_r() and the browser didn't showed that.
So now if you try to do:
```
echo $arr["</b>\nkey"];
```
You will get your desired output:
```
HERE
```

Never trust the output of print_r() or var_dump() if you look at XML

You might have an XML file or string loaded into an object, e.g.

<?xml version="1.0" encoding="UTF-8" ?> 
<rss> 
    <item> 
        <title attribute="xy" ab="xy">test</title> 
    </item> 
</rss>

Now if you use var_dump() or print_r() you will see:

SimpleXMLElement Object
(
    [item] => SimpleXMLElement Object
    (
        [title] => test
    )

)

So as you can see you don't see the attributes of title. So as I said never trust the output of var_dump() or print_r() when you have an XML object. Always use asXML() to see the full XML file/string.

So just use one of the methods shown below:

echo $xml->asXML();  //And look into the source code

highlight_string($xml->asXML());

header ("Content-Type:text/xml");
echo $xml->asXML();

And then you will get the output:

<?xml version="1.0" encoding="UTF-8"?>
<rss> 
    <item> 
        <title attribute="xy" ab="xy">test</title> 
    </item> 
</rss>

For more information see:

General (symbols, errors)

Reference — What does this symbol mean in PHP?
Reference - What does this error mean in PHP?
PHP parse/syntax errors; and how to solve them

Property name problems

How can I access a property with an invalid name?
How to access object properties with names like integers or invalid property names?

How to access array values inside class object?

You mentioned that $value is in a function, but is public. Can you post the function, or clarify whether you meant declaring or instantiating within a function?

If you're instantiating it that's perfectly fine, and you can use the array keys to index $value just like any other array:

$object = new classname;
$name = $object->value["name"];
$age = $object->value["age"];

// Or you can use foreach, getting both key and value
foreach ($object->value as $key => $value) {
    echo $key . ": " . $value;
}

However, if you're talking about declaring public $value in a function then that's a syntax error.

Furthermore if you declare $value (within a function) without the public modifier then its scope is limited to that function and it cannot be public. The array will go out of scope at the end of the function and for all intents and purposes cease to exist.

If this part seems confusing I recommend reading up on visibility in PHP.

Dynamic access to a PHP array

Your syntax is correct:

$this->{$varName}[$key]

You can also use an extra variable for this:

$myTempArr = $this->$arrDataName;

$myTempArr[ $key ];

IMHO, readability is better that way...

Access array using dynamic path

You have two options. First (evil) if to use eval() function - i.e. interpret your string as code.

Second is to parse your path. That will be:

//$path = "['a']['b']['c']";
preg_match_all("/\['(.*?)'\]/", $path, $rgMatches);
$rgResult = $array;
foreach($rgMatches[1] as $sPath)
{
   $rgResult=$rgResult[$sPath];
}

PHP: Access Array Value on the Fly