Rails ( set_no_cache method) Cannot disable browser caching in Safari and Opera
I faced the same problem and found a good solution and I blogged it to
http://www.fordevs.com/2011/10/how-to-prevent-browser-from-caching-a-page-in-rails.html
To add ‘no-cache’, add the following lines @ the application_controller.rb file
before_filter :set_no_cache
and the function
def set_no_cache
response.headers["Cache-Control"] = "no-cache, no-store, max-age=0, must-revalidate"
response.headers["Pragma"] = "no-cache"
response.headers["Expires"] = "Fri, 01 Jan 1990 00:00:00 GMT"
end
How to prevent browser page caching in Rails
I finally figured this out - http://blog.serendeputy.com/posts/how-to-prevent-browsers-from-caching-a-page-in-rails/ in application_controller.rb
.
After Ruby on Rails 5:
class ApplicationController < ActionController::Base
before_action :set_cache_headers
private
def set_cache_headers
response.headers["Cache-Control"] = "no-cache, no-store"
response.headers["Pragma"] = "no-cache"
response.headers["Expires"] = "Mon, 01 Jan 1990 00:00:00 GMT"
end
end
Ruby on Rails 4 and older versions:
class ApplicationController < ActionController::Base
before_filter :set_cache_headers
private
def set_cache_headers
response.headers["Cache-Control"] = "no-cache, no-store"
response.headers["Pragma"] = "no-cache"
response.headers["Expires"] = "Mon, 01 Jan 1990 00:00:00 GMT"
end
end
How do we control web page caching, across all browsers?
Introduction
The correct minimum set of headers that works across all mentioned clients (and proxies):
Cache-Control: no-cache, no-store, must-revalidate
Pragma: no-cache
Expires: 0
The Cache-Control
is per the HTTP 1.1 spec for clients and proxies (and implicitly required by some clients next to Expires
). The Pragma
is per the HTTP 1.0 spec for prehistoric clients. The Expires
is per the HTTP 1.0 and 1.1 specs for clients and proxies. In HTTP 1.1, the Cache-Control
takes precedence over Expires
, so it's after all for HTTP 1.0 proxies only.
If you don't care about IE6 and its broken caching when serving pages over HTTPS with only no-store
, then you could omit Cache-Control: no-cache
.
Cache-Control: no-store, must-revalidate
Pragma: no-cache
Expires: 0
If you don't care about IE6 nor HTTP 1.0 clients (HTTP 1.1 was introduced in 1997), then you could omit Pragma
.
Cache-Control: no-store, must-revalidate
Expires: 0
If you don't care about HTTP 1.0 proxies either, then you could omit Expires
.
Cache-Control: no-store, must-revalidate
On the other hand, if the server auto-includes a valid Date
header, then you could theoretically omit Cache-Control
too and rely on Expires
only.
Date: Wed, 24 Aug 2016 18:32:02 GMT
Expires: 0
But that may fail if e.g. the end-user manipulates the operating system date and the client software is relying on it.
Other Cache-Control
parameters such as max-age
are irrelevant if the abovementioned Cache-Control
parameters are specified. The Last-Modified
header as included in most other answers here is only interesting if you actually want to cache the request, so you don't need to specify it at all.
How to set it?
Using PHP:
header("Cache-Control: no-cache, no-store, must-revalidate"); // HTTP 1.1.
header("Pragma: no-cache"); // HTTP 1.0.
header("Expires: 0"); // Proxies.
Using Java Servlet, or Node.js:
response.setHeader("Cache-Control", "no-cache, no-store, must-revalidate"); // HTTP 1.1.
response.setHeader("Pragma", "no-cache"); // HTTP 1.0.
response.setHeader("Expires", "0"); // Proxies.
Using ASP.NET-MVC
Response.Cache.SetCacheability(HttpCacheability.NoCache); // HTTP 1.1.
Response.Cache.AppendCacheExtension("no-store, must-revalidate");
Response.AppendHeader("Pragma", "no-cache"); // HTTP 1.0.
Response.AppendHeader("Expires", "0"); // Proxies.
Using ASP.NET Web API:
// `response` is an instance of System.Net.Http.HttpResponseMessage
response.Headers.CacheControl = new CacheControlHeaderValue
{
NoCache = true,
NoStore = true,
MustRevalidate = true
};
response.Headers.Pragma.ParseAdd("no-cache");
// We can't use `response.Content.Headers.Expires` directly
// since it allows only `DateTimeOffset?` values.
response.Content?.Headers.TryAddWithoutValidation("Expires", 0.ToString());
Using ASP.NET:
Response.AppendHeader("Cache-Control", "no-cache, no-store, must-revalidate"); // HTTP 1.1.
Response.AppendHeader("Pragma", "no-cache"); // HTTP 1.0.
Response.AppendHeader("Expires", "0"); // Proxies.
Using ASP.NET Core v3
// using Microsoft.Net.Http.Headers
Response.Headers[HeaderNames.CacheControl] = "no-cache, no-store, must-revalidate";
Response.Headers[HeaderNames.Expires] = "0";
Response.Headers[HeaderNames.Pragma] = "no-cache";
Using ASP:
Response.addHeader "Cache-Control", "no-cache, no-store, must-revalidate" ' HTTP 1.1.
Response.addHeader "Pragma", "no-cache" ' HTTP 1.0.
Response.addHeader "Expires", "0" ' Proxies.
Using Ruby on Rails:
headers["Cache-Control"] = "no-cache, no-store, must-revalidate" # HTTP 1.1.
headers["Pragma"] = "no-cache" # HTTP 1.0.
headers["Expires"] = "0" # Proxies.
Using Python/Flask:
response = make_response(render_template(...))
response.headers["Cache-Control"] = "no-cache, no-store, must-revalidate" # HTTP 1.1.
response.headers["Pragma"] = "no-cache" # HTTP 1.0.
response.headers["Expires"] = "0" # Proxies.
Using Python/Django:
response["Cache-Control"] = "no-cache, no-store, must-revalidate" # HTTP 1.1.
response["Pragma"] = "no-cache" # HTTP 1.0.
response["Expires"] = "0" # Proxies.
Using Python/Pyramid:
request.response.headerlist.extend(
(
('Cache-Control', 'no-cache, no-store, must-revalidate'),
('Pragma', 'no-cache'),
('Expires', '0')
)
)
Using Go:
responseWriter.Header().Set("Cache-Control", "no-cache, no-store, must-revalidate") // HTTP 1.1.
responseWriter.Header().Set("Pragma", "no-cache") // HTTP 1.0.
responseWriter.Header().Set("Expires", "0") // Proxies.
Using Clojure (require Ring utils):
(require '[ring.util.response :as r])
(-> response
(r/header "Cache-Control" "no-cache, no-store, must-revalidate")
(r/header "Pragma" "no-cache")
(r/header "Expires" 0))
Using Apache .htaccess
file:
<IfModule mod_headers.c>
Header set Cache-Control "no-cache, no-store, must-revalidate"
Header set Pragma "no-cache"
Header set Expires 0
</IfModule>
Using HTML:
<meta http-equiv="Cache-Control" content="no-cache, no-store, must-revalidate">
<meta http-equiv="Pragma" content="no-cache">
<meta http-equiv="Expires" content="0">
HTML meta tags vs HTTP response headers
Important to know is that when an HTML page is served over an HTTP connection, and a header is present in both the HTTP response headers and the HTML <meta http-equiv>
tags, then the one specified in the HTTP response header will get precedence over the HTML meta tag. The HTML meta tag will only be used when the page is viewed from a local disk file system via a file://
URL. See also W3 HTML spec chapter 5.2.2. Take care with this when you don't specify them programmatically because the webserver can namely include some default values.
Generally, you'd better just not specify the HTML meta tags to avoid confusion by starters and rely on hard HTTP response headers. Moreover, specifically those <meta http-equiv>
tags are invalid in HTML5. Only the http-equiv
values listed in HTML5 specification are allowed.
Verifying the actual HTTP response headers
To verify the one and the other, you can see/debug them in the HTTP traffic monitor of the web browser's developer toolset. You can get there by pressing F12 in Chrome/Firefox23+/IE9+, and then opening the "Network" or "Net" tab panel, and then clicking the HTTP request of interest to uncover all detail about the HTTP request and response. The below screenshot is from Chrome:
I want to set those headers on file downloads too
First of all, this question and answer are targeted on "web pages" (HTML pages), not "file downloads" (PDF, zip, Excel, etc). You'd better have them cached and make use of some file version identifier somewhere in the URI path or query string to force a redownload on a changed file. When applying those no-cache headers on file downloads anyway, then beware of the IE7/8 bug when serving a file download over HTTPS instead of HTTP. For detail, see IE cannot download foo.jsf. IE was not able to open this internet site. The requested site is either unavailable or cannot be found.
How do I stop Opera from caching a page?
As a user, I absolutely detest pages that slow down my history navigation by forcing re-loads when I use the back button. (If the browser you use on a daily basis paid attention to the various caching directives and let them affect history navigation the way you want as a developer you'd probably notice some sites slowing down yourself...)
If you have a very strong use case for doing this I'd say your architecture might be "wrong" in some sense - for example, if you're switching between different "views" of constantly updating data and thus want to enforce re-load when users go back perhaps using Ajaxy techniques for loading the constantly changing data into the current page would be better?
Opera's implementation is on purpose - "caching" is seen as conceptually different from "history navigation", the former is more about storing things on disk and between sessions, the latter is switching back to a temporarily hidden page you just visited, in the state you left it.
However, if you really, really need it there is a loophole in this policy that enables the behaviour you want. Sending "Cache-control: must-revalidate" will force Opera to re-load every page on navigation, but only if you're sending the page over https. (This is a feature requested by and intended for paranoid banks, it slows down way too many normal sites if applied on http).
how to force Cache-Control to no-store in rails 3.2.20
With Rails 3.2 the gem no_cache_control
only works when the rails app is booted in production mode. Can test this by booting your app in production mode with:
rails s -e production
Note: make sure you have your database.yml
pointing somewhere valid for the production environment.
Related Topics
Dynamic Active Record Store Accessors Based Off a User Form
How to Use a Ruby Block to Assign Variables in Chef Recipe
Rails 4 How to Call Accessible_Attributes from Model
Rails Force Ssl Only on Specified Controllers
Getting Google File Picker to Work with Drive.File Scope
Camelcase Column in Postgresql Database in Rails (Activerecord)
Method Invocation in Class Definition
Import SASS File from Database Instead of Filesystem
Zero-Length String Being Returned from String#Split
Aws Cognito User Authentication Missing Required Parameter Srp_A
Rails 4 Session.Id Occasionally Nil
Cucumber Not Finding Step Definitions