PHP Expression ≪≪≪Eob

PHP expression EOB

This is known as heredoc syntax. The documentation will tell you everything you need to know.

Essentially, however:

A third way to delimit strings is the heredoc syntax: <<<. After this operator, an identifier is provided, then a newline. The string itself follows, and then the same identifier again to close the quotation.
The closing identifier must begin in the first column of the line. Also, the identifier must follow the same naming rules as any other label in PHP: it must contain only alphanumeric characters and underscores, and must start with a non-digit character or underscore.

So EOB is just what the author chose as his delimiter, not really sure what it stands for in his case but the identifier can be whatever you want.

What is the name for the operator?

Heredoc:

A third way to delimit strings is the heredoc syntax: <<<. After this operator, an identifier is provided, then a newline. The string itself follows, and then the same identifier again to close the quotation.

The closing identifier must begin in the first column of the line. Also, the identifier must follow the same naming rules as any other label in PHP: it must contain only alphanumeric characters and underscores, and must start with a non-digit character or underscore.

Warning It is very important to note that the line with the closing identifier must contain no other characters, except a semicolon (;). That means especially that the identifier may not be indented, and there may not be any spaces or tabs before or after the semicolon. It's also important to realize that the first character before the closing identifier must be a newline as defined by the local operating system. This is \n on UNIX systems, including Mac OS X. The closing delimiter must also be followed by a newline.

If this rule is broken and the closing identifier is not "clean", it will not be considered a closing identifier, and PHP will continue looking for one. If a proper closing identifier is not found before the end of the current file, a parse error will result at the last line.

Heredocs can not be used for initializing class properties. Since PHP 5.3, this limitation is valid only for heredocs containing variables...

Can we use PHP iF Statements in EOD syntax code

No, because everything inside the <<< block (known as a "HEREDOC") is a string.

If you write the code in the question, you'll be writing a string containing PHP code, which isn't what you want (I hope).

Do your logic outside of the HEREDOC, and use plain variables inside it:

if(isset($variablename)) {
   $outputVar = "...some text";
} else {
    $outputVar = "...some text";
}

print <<<EOD
<h3>Caption</h3>
{$outputVar}
EOD;

Calling PHP functions within HEREDOC strings

I would not use HEREDOC at all for this, personally. It just doesn't make for a good "template building" system. All your HTML is locked down in a string which has several disadvantages

No option for WYSIWYG
No code completion for HTML from IDEs
Output (HTML) locked to logic files
You end up having to use hacks like what you're trying to do now to achieve more complex templating, such as looping

Get a basic template engine, or just use PHP with includes - it's why the language has the <?php and ?> delimiters.

template_file.php

<html>
<head>
  <title><?php echo $page_title; ?></title>
</head>
<body>
  <?php echo getPageContent(); ?>
</body>

index.php

<?php

$page_title = "This is a simple demo";

function getPageContent() {
    return '<p>Hello World!</p>';
}

include('template_file.php');

Reference — What does this symbol mean in PHP?

Incrementing / Decrementing Operators

++ increment operator

-- decrement operator

Example    Name              Effect
---------------------------------------------------------------------
++$a       Pre-increment     Increments $a by one, then returns $a.
$a++       Post-increment    Returns $a, then increments $a by one.
--$a       Pre-decrement     Decrements $a by one, then returns $a.
$a--       Post-decrement    Returns $a, then decrements $a by one.

These can go before or after the variable.

If put before the variable, the increment/decrement operation is done to the variable first then the result is returned. If put after the variable, the variable is first returned, then the increment/decrement operation is done.

For example:

$apples = 10;
for ($i = 0; $i < 10; ++$i) {
    echo 'I have ' . $apples-- . " apples. I just ate one.\n";
}

Live example

In the case above ++$i is used, since it is faster. $i++ would have the same results.

Pre-increment is a little bit faster because it really increments the variable and after that 'returns' the result. Post-increment creates a special variable, copies there the value of the first variable and only after the first variable is used, replaces its value with second's.

However, you must use $apples--, since first, you want to display the current number of apples, and then you want to subtract one from it.

You can also increment letters in PHP:

$i = "a";
while ($i < "c") {
    echo $i++;
}

Once z is reached aa is next, and so on.

Note that character variables can be incremented but not decremented and even so only plain ASCII characters (a-z and A-Z) are supported.

Stack Overflow Posts:

Understanding Incrementing

What does END mean in PHP?

Heredoc syntax:

A third way to delimit strings is the heredoc syntax: <<<. After this operator, an identifier is provided, then a newline. The string itself follows, and then the same identifier again to close the quotation.

The closing identifier must begin in the first column of the line. Also, the identifier must follow the same naming rules as any other label in PHP: it must contain only alphanumeric characters and underscores, and must start with a non-digit character or underscore.

Warning It is very important to note that the line with the closing identifier must contain no other characters, except a semicolon (;). That means especially that the identifier may not be indented, and there may not be any spaces or tabs before or after the semicolon. It's also important to realize that the first character before the closing identifier must be a newline as defined by the local operating system. This is \n on UNIX systems, including Mac OS X. The closing delimiter must also be followed by a newline.

If this rule is broken and the closing identifier is not "clean", it will not be considered a closing identifier, and PHP will continue looking for one. If a proper closing identifier is not found before the end of the current file, a parse error will result at the last line.

Heredocs can not be used for initializing class properties. Since PHP 5.3, this limitation is valid only for heredocs containing variables...

how do i write this out in php? (where i would use the to print out content)

You're talking about heredoc syntax. Example:

$str = <<<EOD
Example of string
spanning multiple lines
using heredoc syntax.
EOD;

What is the difference between single-quoted and double-quoted strings in PHP?

PHP strings can be specified not just in two ways, but in four ways.

Single quoted strings will display things almost completely "as is." Variables and most escape sequences will not be interpreted. The exception is that to display a literal single quote, you can escape it with a back slash \', and to display a back slash, you can escape it with another backslash \\ (So yes, even single quoted strings are parsed).
Double quote strings will display a host of escaped characters (including some regexes), and variables in the strings will be evaluated. An important point here is that you can use curly braces to isolate the name of the variable you want evaluated. For example let's say you have the variable $type and you want to echo "The $types are". That will look for the variable $types. To get around this use echo "The {$type}s are" You can put the left brace before or after the dollar sign. Take a look at string parsing to see how to use array variables and such.
Heredoc string syntax works like double quoted strings. It starts with <<<. After this operator, an identifier is provided, then a newline. The string itself follows, and then the same identifier again to close the quotation. You don't need to escape quotes in this syntax.
Nowdoc (since PHP 5.3.0) string syntax works essentially like single quoted strings. The difference is that not even single quotes or backslashes have to be escaped. A nowdoc is identified with the same <<< sequence used for heredocs, but the identifier which follows is enclosed in single quotes, e.g. <<<'EOT'. No parsing is done in nowdoc.

Notes:
Single quotes inside of single quotes and double quotes inside of double quotes must be escaped:

$string = 'He said "What\'s up?"';
$string = "He said \"What's up?\"";

Speed:

I would not put too much weight on single quotes being faster than double quotes. They probably are faster in certain situations. Here's an article explaining one manner in which single and double quotes are essentially equally fast since PHP 4.3 (Useless Optimizations toward the bottom, section C). Also, this benchmarks page has a single vs double quote comparison. Most of the comparisons are the same. There is one comparison where double quotes are slower than single quotes.

When do I use the PHP constant PHP_EOL ?

Yes, PHP_EOL is ostensibly used to find the newline character in a cross-platform-compatible way, so it handles DOS/Unix issues.

Note that PHP_EOL represents the endline character for the current system. For instance, it will not find a Windows endline when executed on a unix-like system.

What is this in PHP? Multiple code for one variable

Heredoc syntax:

A third way to delimit strings is the heredoc syntax: <<<. After this operator, an identifier is provided, then a newline. The string itself follows, and then the same identifier again to close the quotation.

The closing identifier must begin in the first column of the line. Also, the identifier must follow the same naming rules as any other label in PHP: it must contain only alphanumeric characters and underscores, and must start with a non-digit character or underscore.

Warning It is very important to note that the line with the closing identifier must contain no other characters, except a semicolon (;). That means especially that the identifier may not be indented, and there may not be any spaces or tabs before or after the semicolon. It's also important to realize that the first character before the closing identifier must be a newline as defined by the local operating system. This is \n on UNIX systems, including Mac OS X. The closing delimiter must also be followed by a newline.

If this rule is broken and the closing identifier is not "clean", it will not be considered a closing identifier, and PHP will continue looking for one. If a proper closing identifier is not found before the end of the current file, a parse error will result at the last line.

Heredocs can not be used for initializing class properties. Since PHP 5.3, this limitation is valid only for heredocs containing variables...

PHP Expression ≪≪≪Eob