Finding holes in 2d point sets?
what about some bitmap+vector approach like this:
obtain bounding box of point cloud area coverage
Do this if it is not already known. It should be simple
O(N)cycle through all points.create
map[N][N]of the areaIt is a 'bitmap' of the area for easy data density computation. Just create projection from
area(x,y) -> map[i][j]for example with simple scale. Grid size N is also the accuracy of the output and must be bigger then average point distance !!! so each cell insidemap[][]covers area with at least one point (if not in hole area).compute data density for each cell of
map[][]Easy as pie just clear
map[][].cnt(counter of points) tozeroand compute by simpleO(N)cycle where domap[i][j].cnt++for allpoints(x,y)create list of unused area
(map[][].cnt==0)or(map[][].cnt<=treshold)I do it by Horizontal and Vertical lines for simplicity
segmentate output
Just group lines of the same hole together (intersecting ones ... vector approach) and also can be done in bullet #4 by flood fill (bitmap approach)
polygonize output
Take all edge points of H,V lines of the same hole/group and create polygon (sort them so their connection does not intersect anything). There are lot of libs,algorithms and source code about this.
My source code for this approach:
void main_compute(int N)
{
// cell storage for density computation
struct _cell
{
double x0,x1,y0,y1; // bounding area of points inside cell
int cnt; // points inside cell
_cell(){}; _cell(_cell& a){ *this=a; }; ~_cell(){}; _cell* operator = (const _cell *a) { *this=*a; return this; }; /*_cell* operator = (const _cell &a) { ...copy... return this; };*/
};
// line storage for hole area
struct _line
{
double x0,y0,x1,y1; // line edge points
int id; // id of hole for segmentation/polygonize
int i0,i1,j0,j1; // index in map[][]
_line(){}; _line(_line& a){ *this=a; }; ~_line(){}; _line* operator = (const _line *a) { *this=*a; return this; }; /*_line* operator = (const _line &a) { ...copy... return this; };*/
};
int i,j,k,M=N*N; // M = max N^2 but usualy is much much less so dynamic list will be better
double mx,my; // scale to map
_cell *m; // cell ptr
glview2D::_pnt *p; // point ptr
double x0,x1,y0,y1; // used area (bounding box)
_cell **map=NULL; // cell grid
_line *lin=NULL; // temp line list for hole segmentation
int lins=0; // actual usage/size of lin[M]
// scan point cloud for bounding box (if it is known then skip it)
p=&view.pnt[0];
x0=p->p[0]; x1=x0;
y0=p->p[1]; y1=y0;
for (i=0;i<view.pnt.num;i++)
{
p=&view.pnt[i];
if (x0>p->p[0]) x0=p->p[0];
if (x1<p->p[0]) x1=p->p[0];
if (y0>p->p[1]) y0=p->p[1];
if (y1<p->p[1]) y1=p->p[1];
}
// compute scale for coordinate to map index conversion
mx=double(N)/(x1-x0); // add avoidance of division by zero if empty point cloud !!!
my=double(N)/(y1-y0);
// dynamic allocation of map[N][N],lin[M]
lin=new _line[M];
map=new _cell*[N];
for (i=0;i<N;i++) map[i]=new _cell[N];
// reset map[N][N]
for (i=0;i<N;i++)
for (j=0;j<N;j++)
map[i][j].cnt=0;
// compute point cloud density
for (k=0;k<view.pnt.num;k++)
{
p=&view.pnt[k];
i=double((p->p[0]-x0)*mx); if (i<0) i=0; if (i>=N) i=N-1;
j=double((p->p[1]-y0)*my); if (j<0) j=0; if (j>=N) j=N-1;
m=&map[i][j];
if (!m->cnt)
{
m->x0=p->p[0];
m->x1=p->p[0];
m->y0=p->p[1];
m->y1=p->p[1];
}
if (m->cnt<0x7FFFFFFF) m->cnt++; // avoid overflow
if (m->x0>p->p[0]) m->x0=p->p[0];
if (m->x1<p->p[0]) m->x1=p->p[0];
if (m->y0>p->p[1]) m->y0=p->p[1];
if (m->y1<p->p[1]) m->y1=p->p[1];
}
// find holes (map[i][j].cnt==0) or (map[i][j].cnt<=treshold)
// and create lin[] list of H,V lines covering holes
for (j=0;j<N;j++) // search lines
{
for (i=0;i<N;)
{
int i0,i1;
for (;i<N;i++) if (map[i][j].cnt==0) break; i0=i-1; // find start of hole
for (;i<N;i++) if (map[i][j].cnt!=0) break; i1=i; // find end of hole
if (i0< 0) continue; // skip bad circumstances (edges or no hole found)
if (i1>=N) continue;
if (map[i0][j].cnt==0) continue;
if (map[i1][j].cnt==0) continue;
_line l;
l.i0=i0; l.x0=map[i0][j].x1;
l.i1=i1; l.x1=map[i1][j].x0;
l.j0=j ; l.y0=0.25*(map[i0][j].y0+map[i0][j].y1+map[i1][j].y0+map[i1][j].y1);
l.j1=j ; l.y1=l.y0;
lin[lins]=l; lins++;
}
}
for (i=0;i<N;i++) // search columns
{
for (j=0;j<N;)
{
int j0,j1;
for (;j<N;j++) if (map[i][j].cnt==0) break; j0=j-1; // find start of hole
for (;j<N;j++) if (map[i][j].cnt!=0) break; j1=j; // find end of hole
if (j0< 0) continue; // skip bad circumstances (edges or no hole found)
if (j1>=N) continue;
if (map[i][j0].cnt==0) continue;
if (map[i][j1].cnt==0) continue;
_line l;
l.i0=i ; l.y0=map[i][j0].y1;
l.i1=i ; l.y1=map[i][j1].y0;
l.j0=j0; l.x0=0.25*(map[i][j0].x0+map[i][j0].x1+map[i][j1].x0+map[i][j1].x1);
l.j1=j1; l.x1=l.x0;
lin[lins]=l; lins++;
}
}
// segmentate lin[] ... group lines of the same hole together by lin[].id
// segmentation based on vector lines data
// you can also segmentate the map[][] directly as bitmap during hole detection
for (i=0;i<lins;i++) lin[i].id=i; // all lines are separate
for (;;) // join what you can
{
int e=0,i0,i1;
_line *a,*b;
for (a=lin,i=0;i<lins;i++,a++)
{
for (b=a,j=i;j<lins;j++,b++)
if (a->id!=b->id)
{
// do 2D lines a,b intersect ?
double xx0,yy0,xx1,yy1;
double kx0,ky0,dx0,dy0,t0;
double kx1,ky1,dx1,dy1,t1;
double x0=a->x0,y0=a->y0;
double x1=a->x1,y1=a->y1;
double x2=b->x0,y2=b->y0;
double x3=b->x1,y3=b->y1;
// discart lines with non intersecting bound rectangles
double a0,a1,b0,b1;
if (x0<x1) { a0=x0; a1=x1; } else { a0=x1; a1=x0; }
if (x2<x3) { b0=x2; b1=x3; } else { b0=x3; b1=x2; }
if (a1<b0) continue;
if (a0>b1) continue;
if (y0<y1) { a0=y0; a1=y1; } else { a0=y1; a1=y0; }
if (y2<y3) { b0=y2; b1=y3; } else { b0=y3; b1=y2; }
if (a1<b0) continue;
if (a0>b1) continue;
// compute intersection
kx0=x0; ky0=y0; dx0=x1-x0; dy0=y1-y0;
kx1=x2; ky1=y2; dx1=x3-x2; dy1=y3-y2;
t1=divide(dx0*(ky0-ky1)+dy0*(kx1-kx0),(dx0*dy1)-(dx1*dy0));
xx1=kx1+(dx1*t1);
yy1=ky1+(dy1*t1);
if (fabs(dx0)>=fabs(dy0)) t0=divide(kx1-kx0+(dx1*t1),dx0);
else t0=divide(ky1-ky0+(dy1*t1),dy0);
xx0=kx0+(dx0*t0);
yy0=ky0+(dy0*t0);
// check if intersection exists
if (fabs(xx1-xx0)>1e-6) continue;
if (fabs(yy1-yy0)>1e-6) continue;
if ((t0<0.0)||(t0>1.0)) continue;
if ((t1<0.0)||(t1>1.0)) continue;
// if yes ... intersection point = xx0,yy0
e=1; break;
}
if (e) break; // join found ... stop searching
}
if (!e) break; // no join found ... stop segmentation
i0=a->id; // joid ids ... rename i1 to i0
i1=b->id;
for (a=lin,i=0;i<lins;i++,a++)
if (a->id==i1)
a->id=i0;
}
// visualize lin[]
for (i=0;i<lins;i++)
{
glview2D::_lin l;
l.p0.p[0]=lin[i].x0;
l.p0.p[1]=lin[i].y0;
l.p1.p[0]=lin[i].x1;
l.p1.p[1]=lin[i].y1;
// l.col=0x0000FF00;
l.col=(lin[i].id*0x00D00C10A)+0x00800000; // color is any function of ID
view.lin.add(l);
}
// dynamic deallocation of map[N][N],lin[M]
for (i=0;i<N;i++) delete[] map[i];
delete[] map;
delete[] lin;
}
//---------------------------------------------------------------------------
Just ignore my glview2D stuff (it is my gfx render engine for geometry)
view.pnt[]is dynamic list of your points (generated by random)view.lin[]is dynamic list output H,V lines for visualization onlylin[]is your lines output
This is output:
I am too lazy to add polygonize for now you can see that segmentation works (coloring). If you need also help with polygonize then comment me but I think that should not be any problem.
Complexity estimation depends on the overall hole coverage
but for most of the code it is O(N) and for hole search/segmentation ~O((M^2)+(U^2)) where:
Nis point countMis map grid sizeUis H,V lines count dependent on holes ...M << N, U << M*M
as you can see for 3783 points 30x30 grid on the image above it took almost 9ms on my setup
[Edit1] played with vector polygonize a little
for simple holes is fine but for more complicated ones there are some hick-ups yet
[Edit2] finally got a little time for this so here is it:
This is simple class for hole/polygon search in more pleasant/manageable form:
//---------------------------------------------------------------------------
class holes
{
public:
int xs,ys,n; // cell grid x,y - size and points count
int **map; // points density map[xs][ys]
// i=(x-x0)*g2l; x=x0+(i*l2g);
// j=(y-y0)*g2l; y=y0+(j*l2g);
double mg2l,ml2g; // scale to/from global/map space (x,y) <-> map[i][j]
double x0,x1,y0,y1; // used area (bounding box)
struct _line
{
int id; // id of hole for segmentation/polygonize
int i0,i1,j0,j1; // index in map[][]
_line(){}; _line(_line& a){ *this=a; }; ~_line(){}; _line* operator = (const _line *a) { *this=*a; return this; }; /*_line* operator = (const _line &a) { ...copy... return this; };*/
};
List<_line> lin;
int lin_i0; // start index for perimeter lines (smaller indexes are the H,V lines inside hole)
struct _point
{
int i,j; // index in map[][]
int p0,p1; // previous next point
int used;
_point(){}; _point(_point& a){ *this=a; }; ~_point(){}; _point* operator = (const _point *a) { *this=*a; return this; }; /*_point* operator = (const _point &a) { ...copy... return this; };*/
};
List<_point> pnt;
// class init and internal stuff
holes() { xs=0; ys=0; n=0; map=NULL; mg2l=1.0; ml2g=1.0; x0=0.0; y0=0.0; x1=0.0; y1=0.0; lin_i0=0; };
holes(holes& a){ *this=a; };
~holes() { _free(); };
holes* operator = (const holes *a) { *this=*a; return this; };
holes* operator = (const holes &a)
{
xs=0; ys=0; n=a.n; map=NULL;
mg2l=a.mg2l; x0=a.x0; x1=a.x1;
ml2g=a.ml2g; y0=a.y0; y1=a.y1;
_alloc(a.xs,a.ys);
for (int i=0;i<xs;i++)
for (int j=0;j<ys;j++) map[i][j]=a.map[i][j];
return this;
}
void _free() { if (map) { for (int i=0;i<xs;i++) if (map[i]) delete[] map[i]; delete[] map; } xs=0; ys=0; }
void _alloc(int _xs,int _ys) { int i=0; _free(); xs=_xs; ys=_ys; map=new int*[xs]; if (map) for (i=0;i<xs;i++) { map[i]=new int[ys]; if (map[i]==NULL) { i=-1; break; } } else i=-1; if (i<0) _free(); }
// scann boundary box interface
void scann_beg();
void scann_pnt(double x,double y);
void scann_end();
// dynamic allocations
void cell_size(double sz); // compute/allocate grid from grid cell size = sz x sz
// scann holes interface
void holes_beg();
void holes_pnt(double x,double y);
void holes_end();
// global(x,y) <- local map[i][j] + half cell offset
inline void l2g(double &x,double &y,int i,int j) { x=x0+((double(i)+0.5)*ml2g); y=y0+((double(j)+0.5)*ml2g); }
// local map[i][j] <- global(x,y)
inline void g2l(int &i,int &j,double x,double y) { i= double((x-x0) *mg2l); j= double((y-y0) *mg2l); }
};
//---------------------------------------------------------------------------
void holes::scann_beg()
{
x0=0.0; y0=0.0; x1=0.0; y1=0.0; n=0;
}
//---------------------------------------------------------------------------
void holes::scann_pnt(double x,double y)
{
if (!n) { x0=x; y0=y; x1=x; y1=y; }
if (n<0x7FFFFFFF) n++; // avoid overflow
if (x0>x) x0=x; if (x1<x) x1=x;
if (y0>y) y0=y; if (y1<y) y1=y;
}
//---------------------------------------------------------------------------
void holes::scann_end()
{
}
//---------------------------------------------------------------------------
void holes::cell_size(double sz)
{
int x,y;
if (sz<1e-6) sz=1e-6;
x=ceil((x1-x0)/sz);
y=ceil((y1-y0)/sz);
_alloc(x,y);
ml2g=sz; mg2l=1.0/sz;
}
//---------------------------------------------------------------------------
void holes::holes_beg()
{
int i,j;
for (i=0;i<xs;i++)
for (j=0;j<ys;j++)
map[i][j]=0;
}
//---------------------------------------------------------------------------
void holes::holes_pnt(double x,double y)
{
int i,j;
g2l(i,j,x,y);
if ((i>=0)&&(i<xs))
if ((j>=0)&&(j<ys))
if (map[i][j]<0x7FFFFFFF) map[i][j]++; // avoid overflow
}
//---------------------------------------------------------------------------
void holes::holes_end()
{
int i,j,e,i0,i1;
List<int> ix; // hole lines start/stop indexes for speed up the polygonization
_line *a,*b,l;
_point *aa,*bb,p;
lin.num=0; lin_i0=0;// clear lines
ix.num=0; // clear indexes
// find holes (map[i][j].cnt==0) or (map[i][j].cnt<=treshold)
// and create lin[] list of H,V lines covering holes
for (j=0;j<ys;j++) // search lines
for (i=0;i<xs;)
{
int i0,i1;
for (;i<xs;i++) if (map[i][j]==0) break; i0=i-1; // find start of hole
for (;i<xs;i++) if (map[i][j]!=0) break; i1=i; // find end of hole
if (i0< 0) continue; // skip bad circumstances (edges or no hole found)
if (i1>=xs) continue;
if (map[i0][j]==0) continue;
if (map[i1][j]==0) continue;
l.i0=i0;
l.i1=i1;
l.j0=j ;
l.j1=j ;
l.id=-1;
lin.add(l);
}
for (i=0;i<xs;i++) // search columns
for (j=0;j<ys;)
{
int j0,j1;
for (;j<ys;j++) if (map[i][j]==0) break; j0=j-1; // find start of hole
for (;j<ys;j++) if (map[i][j]!=0) break; j1=j ; // find end of hole
if (j0< 0) continue; // skip bad circumstances (edges or no hole found)
if (j1>=ys) continue;
if (map[i][j0]==0) continue;
if (map[i][j1]==0) continue;
l.i0=i ;
l.i1=i ;
l.j0=j0;
l.j1=j1;
l.id=-1;
lin.add(l);
}
// segmentate lin[] ... group lines of the same hole together by lin[].id
// segmentation based on vector lines data
// you can also segmentate the map[][] directly as bitmap during hole detection
for (i=0;i<lin.num;i++) lin[i].id=i; // all lines are separate
for (;;) // join what you can
{
for (e=0,a=lin.dat,i=0;i<lin.num;i++,a++)
{
for (b=a,j=i;j<lin.num;j++,b++)
if (a->id!=b->id)
{
// if a,b not intersecting or neighbouring
if (a->i0>b->i1) continue;
if (b->i0>a->i1) continue;
if (a->j0>b->j1) continue;
if (b->j0>a->j1) continue;
// if they do mark e for join groups
e=1; break;
}
if (e) break; // join found ... stop searching
}
if (!e) break; // no join found ... stop segmentation
i0=a->id; // joid ids ... rename i1 to i0
i1=b->id;
for (a=lin.dat,i=0;i<lin.num;i++,a++)
if (a->id==i1)
a->id=i0;
}
// sort lin[] by id
for (e=1;e;) for (e=0,a=&lin[0],b=&lin[1],i=1;i<lin.num;i++,a++,b++)
if (a->id>b->id) { l=*a; *a=*b; *b=l; e=1; }
// re id lin[] and prepare start/stop indexes
for (i0=-1,i1=-1,a=&lin[0],i=0;i<lin.num;i++,a++)
if (a->id==i1) a->id=i0;
else { i0++; i1=a->id; a->id=i0; ix.add(i); }
ix.add(lin.num);
// polygonize
lin_i0=lin.num;
for (j=1;j<ix.num;j++) // process hole
{
i0=ix[j-1]; i1=ix[j];
// create border pnt[] list (unique points only)
pnt.num=0; p.used=0; p.p0=-1; p.p1=-1;
for (a=&lin[i0],i=i0;i<i1;i++,a++)
{
p.i=a->i0;
p.j=a->j0;
map[p.i][p.j]=0;
for (aa=&pnt[0],e=0;e<pnt.num;e++,aa++)
if ((aa->i==p.i)&&(aa->j==p.j)) { e=-1; break; }
if (e>=0) pnt.add(p);
p.i=a->i1;
p.j=a->j1;
map[p.i][p.j]=0;
for (aa=&pnt[0],e=0;e<pnt.num;e++,aa++)
if ((aa->i==p.i)&&(aa->j==p.j)) { e=-1; break; }
if (e>=0) pnt.add(p);
}
// mark not border points
for (aa=&pnt[0],i=0;i<pnt.num;i++,aa++)
if (!aa->used) // ignore marked points
if ((aa->i>0)&&(aa->i<xs-1)) // ignore map[][] border points
if ((aa->j>0)&&(aa->j<ys-1))
{ // ignore if any non hole cell around
if (map[aa->i-1][aa->j-1]>0) continue;
if (map[aa->i-1][aa->j ]>0) continue;
if (map[aa->i-1][aa->j+1]>0) continue;
if (map[aa->i ][aa->j-1]>0) continue;
if (map[aa->i ][aa->j+1]>0) continue;
if (map[aa->i+1][aa->j-1]>0) continue;
if (map[aa->i+1][aa->j ]>0) continue;
if (map[aa->i+1][aa->j+1]>0) continue;
aa->used=1;
}
// delete marked points
for (aa=&pnt[0],e=0,i=0;i<pnt.num;i++,aa++)
if (!aa->used) { pnt[e]=*aa; e++; } pnt.num=e;
// connect neighbouring points distance=1
for (i0= 0,aa=&pnt[i0];i0<pnt.num;i0++,aa++)
if (aa->used<2)
for (i1=i0+1,bb=&pnt[i1];i1<pnt.num;i1++,bb++)
if (bb->used<2)
{
i=aa->i-bb->i; if (i<0) i=-i; e =i;
i=aa->j-bb->j; if (i<0) i=-i; e+=i;
if (e!=1) continue;
aa->used++; if (aa->p0<0) aa->p0=i1; else aa->p1=i1;
bb->used++; if (bb->p0<0) bb->p0=i0; else bb->p1=i0;
}
// try to connect neighbouring points distance=sqrt(2)
for (i0= 0,aa=&pnt[i0];i0<pnt.num;i0++,aa++)
if (aa->used<2)
for (i1=i0+1,bb=&pnt[i1];i1<pnt.num;i1++,bb++)
if (bb->used<2)
if ((aa->p0!=i1)&&(aa->p1!=i1))
if ((bb->p0!=i0)&&(bb->p1!=i0))
{
if ((aa->used)&&(aa->p0==bb->p0)) continue; // avoid small closed loops
i=aa->i-bb->i; if (i<0) i=-i; e =i*i;
i=aa->j-bb->j; if (i<0) i=-i; e+=i*i;
if (e!=2) continue;
aa->used++; if (aa->p0<0) aa->p0=i1; else aa->p1=i1;
bb->used++; if (bb->p0<0) bb->p0=i0; else bb->p1=i0;
}
// try to connect to closest point
int ii,dd;
for (i0= 0,aa=&pnt[i0];i0<pnt.num;i0++,aa++)
if (aa->used<2)
{
for (ii=-1,i1=i0+1,bb=&pnt[i1];i1<pnt.num;i1++,bb++)
if (bb->used<2)
if ((aa->p0!=i1)&&(aa->p1!=i1))
if ((bb->p0!=i0)&&(bb->p1!=i0))
{
i=aa->i-bb->i; if (i<0) i=-i; e =i*i;
i=aa->j-bb->j; if (i<0) i=-i; e+=i*i;
if ((ii<0)||(e<dd)) { ii=i1; dd=e; }
}
if (ii<0) continue;
i1=ii; bb=&pnt[i1];
aa->used++; if (aa->p0<0) aa->p0=i1; else aa->p1=i1;
bb->used++; if (bb->p0<0) bb->p0=i0; else bb->p1=i0;
}
// add connected points to lin[] ... this is hole perimeter !!!
// lines are 2 x duplicated so some additional code for sort the order of line swill be good idea
l.id=lin[ix[j-1]].id;
for (i0=0,aa=&pnt[i0];i0<pnt.num;i0++,aa++)
{
l.i0=aa->i;
l.j0=aa->j;
// [edit3] this avoid duplicating lines
if (aa->p0>i0) { bb=&pnt[aa->p0]; l.i1=bb->i; l.j1=bb->j; lin.add(l); }
if (aa->p1>i0) { bb=&pnt[aa->p1]; l.i1=bb->i; l.j1=bb->j; lin.add(l); }
//if (aa->p0>=0) { bb=&pnt[aa->p0]; l.i1=bb->i; l.j1=bb->j; lin.add(l); }
//if (aa->p1>=0) { bb=&pnt[aa->p1]; l.i1=bb->i; l.j1=bb->j; lin.add(l); }
}
}
}
//---------------------------------------------------------------------------
You just need to replace my List<T> template with std::list or whatever (that template I cannot share). It is an dynamic 1D array of T ...
List<int> x;is the same asint x[];x.add();add empty item to xx.add(a);add a item to xx.reset()clears the arrayx.allocate(size)preallocate space to avoid reallocations on the run which is slowx.numis number of items in x[] ... used size in items
in the original code are only static arrays so if you are confused check with it instead.
Now how to use it:
h.scann_beg(); for (i=0;i<view.pnt.num;i++) { p=view.pnt[i].p0.p; h.scann_pnt(p[0],p[1]); } h.scann_end();
h.cell_size(2.5);
h.holes_beg(); for (i=0;i<view.pnt.num;i++) { p=view.pnt[i].p0.p; h.holes_pnt(p[0],p[1]); } h.holes_end();
where view.pnt[] is list of input points and inside it: view.pnt[i].p0.p[ 2 ]= { x,y }
Output is in h.lin[] and lin_i0 where:
h.lin[i] i= < 0,lin_i0 )are the inside H,V linesh.lin[i] i= < lin_i0,h.lin.num )are the perimeter
The perimeter lines are not ordered and are duplicated twice so just order them and remove duplicates (too lazy for that). Inside lin[] are id .. id of hole 0,1,2,3,... to which the line belongs and i,j coordinates inside map. so for proper output into your world coordinates do something like this:
int i,j;
holes h; // holes class
double *p; // input point list ptr
h.scann_beg(); for (i=0;i<view.pnt.num;i++) { p=view.pnt[i].p0.p; h.scann_pnt(p[0],p[1]); } h.scann_end();
h.cell_size(2.5);
h.holes_beg(); for (i=0;i<view.pnt.num;i++) { p=view.pnt[i].p0.p; h.holes_pnt(p[0],p[1]); } h.holes_end();
DWORD coltab[]=
{
0x000000FF,
0x0000FF00,
0x00FF0000,
0x0000FFFF,
0x00FFFF00,
0x00FF00FF,
0x00FFFFFF,
0x00000088,
0x00008800,
0x00880000,
0x00008888,
0x00888800,
0x00880088,
0x00888888,
};
for (i=0;i<h.lin.num;i++) // draw lin[]
{
glview2D::_lin a;
holes::_line *b=&h.lin[i];
h.l2g(a.p0.p[0],a.p0.p[1],b->i0,b->j0);
h.l2g(a.p1.p[0],a.p1.p[1],b->i1,b->j1);
if (i<h.lin_i0) // H,V lines inside hole(b->id) .. gray [edit3] was <= which is wrong and miss-color first perimeter line
{
a.col=0x00808080;
}
else{ // hole(b->id) perimeter lines ... each hole different collor
if ((b->id>=0)&&(b->id<14)) a.col=coltab[b->id];
if (b->id==-1) a.col=0x00FFFFFF; // special debug lines
if (b->id==-2) a.col=0x00AA8040; // special debug lines
}
view.lin.add(a); // here draw your line or add it to your polygon instead
}
- my
view.lin[]has members:p0,p1,which are points asview.pnt[]andcolwhich is color
I saw only one issue with this when holes are too small (diameter < 3 cells) otherwise is OK
[edit4] reordering perimeter lines
to do that just instead of this:
/* add connected points to lin[] ... this is hole perimeter !!!
// lines are 2 x duplicated so some additional code for sort the order of line swill be good idea
l.id=lin[ix[j-1]].id;
for (i0=0,aa=&pnt[i0];i0<pnt.num;i0++,aa++)
{
l.i0=aa->i;
l.j0=aa->j;
// [edit3] this avoid duplicating lines
if (aa->p0>i0) { bb=&pnt[aa->p0]; l.i1=bb->i; l.j1=bb->j; lin.add(l); }
if (aa->p1>i0) { bb=&pnt[aa->p1]; l.i1=bb->i; l.j1=bb->j; lin.add(l); }
//if (aa->p0>=0) { bb=&pnt[aa->p0]; l.i1=bb->i; l.j1=bb->j; lin.add(l); }
//if (aa->p1>=0) { bb=&pnt[aa->p1]; l.i1=bb->i; l.j1=bb->j; lin.add(l); }
} */
do this:
// add connected points to lin[] ... this is hole perimeter !!!
l.id=lin[ix[j-1]].id;
// add index of points instead points
int lin_i1=lin.num;
for (i0=0,aa=&pnt[i0];i0<pnt.num;i0++,aa++)
{
l.i0=i0;
if (aa->p0>i0) { l.i1=aa->p0; lin.add(l); }
if (aa->p1>i0) { l.i1=aa->p1; lin.add(l); }
}
// reorder perimeter lines
for (i0=lin_i1,a=&lin[i0];i0<lin.num-1;i0++,a++)
for (i1=i0+1 ,b=&lin[i1];i1<lin.num ;i1++,b++)
{
if (a->i1==b->i0) { a++; l=*a; *a=*b; *b=l; a--; break; }
if (a->i1==b->i1) { a++; l=*a; *a=*b; *b=l; i=a->i0; a->i0=a->i1; a->i1=i; a--; break; }
}
// convert point indexes to points
for (i0=lin_i1,a=&lin[i0];i0<lin.num;i0++,a++)
{
bb=&pnt[a->i0]; a->i0=bb->i; a->j0=bb->j;
bb=&pnt[a->i1]; a->i1=bb->i; a->j1=bb->j;
}
[Edit5] How polygonize inside holes::holes_end works
As input for this you need the list of all H,V lines lin[] segmentated/grouped/sorted by hole and the density map map[][].
loop through all holes
loop through all H,V lines of processed hole
Create list of all unique line endpoints
pnt[](no duplicates). So take 2 endpoints for each line and look if each point is already in the list. If not add it there else ignore it.delete all non border points from list
So remove all points that have no contact with non-hole area by looking into 4 neighbors in the density
map[][]do connected components analysis on the points
- set
used=0; p0=-1; p1=-1;for all points inpnt[]list connect points with
distance=1loop through all points
pnt[]withused<2which means they are not fully used yet and for each such point searchpnt[]again for another such point that has alsodistance = 1to it.
Finding holes in 2d point cloud
Solved
Density-based spatial clustering of applications with noise (DBSCAN) Identify each hole according to estimated number of clusters, the diameter can be calculated using the Convex hull
Related Topics
Json.Net Serialization of Type With Polymorphic Child Object
How to Deserialize an Array of Values With a Fixed Schema to a Strongly Typed Data Class
How Is Generic Covariance & Contra-Variance Implemented in C# 4.0
Difference Between a Regular String and a Verbatim String
Double to String Conversion Without Scientific Notation
Serialport Not Receiving Any Data
Split a String by Another String in C#
Ignoring Accented Letters in String Comparison
Comparing Object Properties in C#
Is Polymorphic Deserialization Possible in System.Text.Json
Convert Datatable to Json in C#
How Should the Viewmodel Close the Form
Get String Between Two Strings in a String
What Does Principal End of an Association Means in 1:1 Relationship in Entity Framework
Will the Ie9 Webbrowser Control Support All of Ie9'S Features, Including Svg
- set