What's the best way to convert a number to a string in JavaScript?
like this:
var foo = 45;
var bar = '' + foo;
Actually, even though I typically do it like this for simple convenience, over 1,000s of iterations it appears for raw speed there is an advantage for .toString()
See Performance tests here (not by me, but found when I went to write my own):
http://jsben.ch/#/ghQYR
Fastest based on the JSPerf test above: str = num.toString();
It should be noted that the difference in speed is not overly significant when you consider that it can do the conversion any way 1 Million times in 0.1 seconds.
Update: The speed seems to differ greatly by browser. In Chrome num + '' seems to be fastest based on this test http://jsben.ch/#/ghQYR
Update 2: Again based on my test above it should be noted that Firefox 20.0.1 executes the .toString() about 100 times slower than the '' + num sample.
JavaScript numbers to Words
JavaScript is parsing the group of 3 numbers as an octal number when there's a leading zero digit. When the group of three digits is all zeros, the result is the same whether the base is octal or decimal.
But when you give JavaScript '009' (or '008'), that's an invalid octal number, so you get zero back.
If you had gone through the whole set of numbers from 190,000,001 to 190,000,010 you'd hav seen JavaScript skip '...,008' and '...,009' but emit 'eight' for '...,010'. That's the 'Eureka!' moment.
Change:
for (j = 0; j < finlOutPut.length; j++) {
finlOutPut[j] = triConvert(parseInt(finlOutPut[j]));
}
to
for (j = 0; j < finlOutPut.length; j++) {
finlOutPut[j] = triConvert(parseInt(finlOutPut[j],10));
}
Code also kept on adding commas after every non-zero group, so I played with it and found the right spot to add the comma.
Old:
for (b = finlOutPut.length - 1; b >= 0; b--) {
if (finlOutPut[b] != "dontAddBigSufix") {
finlOutPut[b] = finlOutPut[b] + bigNumArry[bigScalCntr] + ' , ';
bigScalCntr++;
}
else {
//replace the string at finlOP[b] from "dontAddBigSufix" to empty String.
finlOutPut[b] = ' ';
bigScalCntr++; //advance the counter
}
}
//convert The output Arry to , more printable string
for(n = 0; n<finlOutPut.length; n++){
output +=finlOutPut[n];
}
New:
for (b = finlOutPut.length - 1; b >= 0; b--) {
if (finlOutPut[b] != "dontAddBigSufix") {
finlOutPut[b] = finlOutPut[b] + bigNumArry[bigScalCntr]; // <<<
bigScalCntr++;
}
else {
//replace the string at finlOP[b] from "dontAddBigSufix" to empty String.
finlOutPut[b] = ' ';
bigScalCntr++; //advance the counter
}
}
//convert The output Arry to , more printable string
var nonzero = false; // <<<
for(n = 0; n<finlOutPut.length; n++){
if (finlOutPut[n] != ' ') { // <<<
if (nonzero) output += ' , '; // <<<
nonzero = true; // <<<
} // <<<
output +=finlOutPut[n];
}
How to convert number to words in java
Here is the code, I don't think there is any method in SE.
It basically converts number to string and parses String and associates it with the weight
for example
1000
1 is treated as thousand position and 1 gets mapped to "one" and thousand because of position
This is the code from the website:
English
import java.text.DecimalFormat;
public class EnglishNumberToWords {
private static final String[] tensNames = {
"",
" ten",
" twenty",
" thirty",
" forty",
" fifty",
" sixty",
" seventy",
" eighty",
" ninety"
};
private static final String[] numNames = {
"",
" one",
" two",
" three",
" four",
" five",
" six",
" seven",
" eight",
" nine",
" ten",
" eleven",
" twelve",
" thirteen",
" fourteen",
" fifteen",
" sixteen",
" seventeen",
" eighteen",
" nineteen"
};
private EnglishNumberToWords() {}
private static String convertLessThanOneThousand(int number) {
String soFar;
if (number % 100 < 20){
soFar = numNames[number % 100];
number /= 100;
}
else {
soFar = numNames[number % 10];
number /= 10;
soFar = tensNames[number % 10] + soFar;
number /= 10;
}
if (number == 0) return soFar;
return numNames[number] + " hundred" + soFar;
}
public static String convert(long number) {
// 0 to 999 999 999 999
if (number == 0) { return "zero"; }
String snumber = Long.toString(number);
// pad with "0"
String mask = "000000000000";
DecimalFormat df = new DecimalFormat(mask);
snumber = df.format(number);
// XXXnnnnnnnnn
int billions = Integer.parseInt(snumber.substring(0,3));
// nnnXXXnnnnnn
int millions = Integer.parseInt(snumber.substring(3,6));
// nnnnnnXXXnnn
int hundredThousands = Integer.parseInt(snumber.substring(6,9));
// nnnnnnnnnXXX
int thousands = Integer.parseInt(snumber.substring(9,12));
String tradBillions;
switch (billions) {
case 0:
tradBillions = "";
break;
case 1 :
tradBillions = convertLessThanOneThousand(billions)
+ " billion ";
break;
default :
tradBillions = convertLessThanOneThousand(billions)
+ " billion ";
}
String result = tradBillions;
String tradMillions;
switch (millions) {
case 0:
tradMillions = "";
break;
case 1 :
tradMillions = convertLessThanOneThousand(millions)
+ " million ";
break;
default :
tradMillions = convertLessThanOneThousand(millions)
+ " million ";
}
result = result + tradMillions;
String tradHundredThousands;
switch (hundredThousands) {
case 0:
tradHundredThousands = "";
break;
case 1 :
tradHundredThousands = "one thousand ";
break;
default :
tradHundredThousands = convertLessThanOneThousand(hundredThousands)
+ " thousand ";
}
result = result + tradHundredThousands;
String tradThousand;
tradThousand = convertLessThanOneThousand(thousands);
result = result + tradThousand;
// remove extra spaces!
return result.replaceAll("^\\s+", "").replaceAll("\\b\\s{2,}\\b", " ");
}
/**
* testing
* @param args
*/
public static void main(String[] args) {
System.out.println("*** " + EnglishNumberToWords.convert(0));
System.out.println("*** " + EnglishNumberToWords.convert(1));
System.out.println("*** " + EnglishNumberToWords.convert(16));
System.out.println("*** " + EnglishNumberToWords.convert(100));
System.out.println("*** " + EnglishNumberToWords.convert(118));
System.out.println("*** " + EnglishNumberToWords.convert(200));
System.out.println("*** " + EnglishNumberToWords.convert(219));
System.out.println("*** " + EnglishNumberToWords.convert(800));
System.out.println("*** " + EnglishNumberToWords.convert(801));
System.out.println("*** " + EnglishNumberToWords.convert(1316));
System.out.println("*** " + EnglishNumberToWords.convert(1000000));
System.out.println("*** " + EnglishNumberToWords.convert(2000000));
System.out.println("*** " + EnglishNumberToWords.convert(3000200));
System.out.println("*** " + EnglishNumberToWords.convert(700000));
System.out.println("*** " + EnglishNumberToWords.convert(9000000));
System.out.println("*** " + EnglishNumberToWords.convert(9001000));
System.out.println("*** " + EnglishNumberToWords.convert(123456789));
System.out.println("*** " + EnglishNumberToWords.convert(2147483647));
System.out.println("*** " + EnglishNumberToWords.convert(3000000010L));
/*
*** zero
*** one
*** sixteen
*** one hundred
*** one hundred eighteen
*** two hundred
*** two hundred nineteen
*** eight hundred
*** eight hundred one
*** one thousand three hundred sixteen
*** one million
*** two millions
*** three millions two hundred
*** seven hundred thousand
*** nine millions
*** nine millions one thousand
*** one hundred twenty three millions four hundred
** fifty six thousand seven hundred eighty nine
*** two billion one hundred forty seven millions
** four hundred eighty three thousand six hundred forty seven
*** three billion ten
**/
}
}
Français
Quite different than the english version but french is a lot more difficult!
package com.rgagnon.howto;
import java.text.*;
class FrenchNumberToWords {
private static final String[] dizaineNames = {
"",
"",
"vingt",
"trente",
"quarante",
"cinquante",
"soixante",
"soixante",
"quatre-vingt",
"quatre-vingt"
};
private static final String[] uniteNames1 = {
"",
"un",
"deux",
"trois",
"quatre",
"cinq",
"six",
"sept",
"huit",
"neuf",
"dix",
"onze",
"douze",
"treize",
"quatorze",
"quinze",
"seize",
"dix-sept",
"dix-huit",
"dix-neuf"
};
private static final String[] uniteNames2 = {
"",
"",
"deux",
"trois",
"quatre",
"cinq",
"six",
"sept",
"huit",
"neuf",
"dix"
};
private FrenchNumberToWords() {}
private static String convertZeroToHundred(int number) {
int laDizaine = number / 10;
int lUnite = number % 10;
String resultat = "";
switch (laDizaine) {
case 1 :
case 7 :
case 9 :
lUnite = lUnite + 10;
break;
default:
}
// séparateur "-" "et" ""
String laLiaison = "";
if (laDizaine > 1) {
laLiaison = "-";
}
// cas particuliers
switch (lUnite) {
case 0:
laLiaison = "";
break;
case 1 :
if (laDizaine == 8) {
laLiaison = "-";
}
else {
laLiaison = " et ";
}
break;
case 11 :
if (laDizaine==7) {
laLiaison = " et ";
}
break;
default:
}
// dizaines en lettres
switch (laDizaine) {
case 0:
resultat = uniteNames1[lUnite];
break;
case 8 :
if (lUnite == 0) {
resultat = dizaineNames[laDizaine];
}
else {
resultat = dizaineNames[laDizaine]
+ laLiaison + uniteNames1[lUnite];
}
break;
default :
resultat = dizaineNames[laDizaine]
+ laLiaison + uniteNames1[lUnite];
}
return resultat;
}
private static String convertLessThanOneThousand(int number) {
int lesCentaines = number / 100;
int leReste = number % 100;
String sReste = convertZeroToHundred(leReste);
String resultat;
switch (lesCentaines) {
case 0:
resultat = sReste;
break;
case 1 :
if (leReste > 0) {
resultat = "cent " + sReste;
}
else {
resultat = "cent";
}
break;
default :
if (leReste > 0) {
resultat = uniteNames2[lesCentaines] + " cent " + sReste;
}
else {
resultat = uniteNames2[lesCentaines] + " cents";
}
}
return resultat;
}
public static String convert(long number) {
// 0 à 999 999 999 999
if (number == 0) { return "zéro"; }
String snumber = Long.toString(number);
// pad des "0"
String mask = "000000000000";
DecimalFormat df = new DecimalFormat(mask);
snumber = df.format(number);
// XXXnnnnnnnnn
int lesMilliards = Integer.parseInt(snumber.substring(0,3));
// nnnXXXnnnnnn
int lesMillions = Integer.parseInt(snumber.substring(3,6));
// nnnnnnXXXnnn
int lesCentMille = Integer.parseInt(snumber.substring(6,9));
// nnnnnnnnnXXX
int lesMille = Integer.parseInt(snumber.substring(9,12));
String tradMilliards;
switch (lesMilliards) {
case 0:
tradMilliards = "";
break;
case 1 :
tradMilliards = convertLessThanOneThousand(lesMilliards)
+ " milliard ";
break;
default :
tradMilliards = convertLessThanOneThousand(lesMilliards)
+ " milliards ";
}
String resultat = tradMilliards;
String tradMillions;
switch (lesMillions) {
case 0:
tradMillions = "";
break;
case 1 :
tradMillions = convertLessThanOneThousand(lesMillions)
+ " million ";
break;
default :
tradMillions = convertLessThanOneThousand(lesMillions)
+ " millions ";
}
resultat = resultat + tradMillions;
String tradCentMille;
switch (lesCentMille) {
case 0:
tradCentMille = "";
break;
case 1 :
tradCentMille = "mille ";
break;
default :
tradCentMille = convertLessThanOneThousand(lesCentMille)
+ " mille ";
}
resultat = resultat + tradCentMille;
String tradMille;
tradMille = convertLessThanOneThousand(lesMille);
resultat = resultat + tradMille;
return resultat;
}
public static void main(String[] args) {
System.out.println("*** " + FrenchNumberToWords.convert(0));
System.out.println("*** " + FrenchNumberToWords.convert(9));
System.out.println("*** " + FrenchNumberToWords.convert(19));
System.out.println("*** " + FrenchNumberToWords.convert(21));
System.out.println("*** " + FrenchNumberToWords.convert(28));
System.out.println("*** " + FrenchNumberToWords.convert(71));
System.out.println("*** " + FrenchNumberToWords.convert(72));
System.out.println("*** " + FrenchNumberToWords.convert(80));
System.out.println("*** " + FrenchNumberToWords.convert(81));
System.out.println("*** " + FrenchNumberToWords.convert(89));
System.out.println("*** " + FrenchNumberToWords.convert(90));
System.out.println("*** " + FrenchNumberToWords.convert(91));
System.out.println("*** " + FrenchNumberToWords.convert(97));
System.out.println("*** " + FrenchNumberToWords.convert(100));
System.out.println("*** " + FrenchNumberToWords.convert(101));
System.out.println("*** " + FrenchNumberToWords.convert(110));
System.out.println("*** " + FrenchNumberToWords.convert(120));
System.out.println("*** " + FrenchNumberToWords.convert(200));
System.out.println("*** " + FrenchNumberToWords.convert(201));
System.out.println("*** " + FrenchNumberToWords.convert(232));
System.out.println("*** " + FrenchNumberToWords.convert(999));
System.out.println("*** " + FrenchNumberToWords.convert(1000));
System.out.println("*** " + FrenchNumberToWords.convert(1001));
System.out.println("*** " + FrenchNumberToWords.convert(10000));
System.out.println("*** " + FrenchNumberToWords.convert(10001));
System.out.println("*** " + FrenchNumberToWords.convert(100000));
System.out.println("*** " + FrenchNumberToWords.convert(2000000));
System.out.println("*** " + FrenchNumberToWords.convert(3000000000L));
System.out.println("*** " + FrenchNumberToWords.convert(2147483647));
/*
*** OUTPUT
*** zéro
*** neuf
*** dix-neuf
*** vingt et un
*** vingt-huit
*** soixante et onze
*** soixante-douze
*** quatre-vingt
*** quatre-vingt-un
*** quatre-vingt-neuf
*** quatre-vingt-dix
*** quatre-vingt-onze
*** quatre-vingt-dix-sept
*** cent
*** cent un
*** cent dix
*** cent vingt
*** deux cents
*** deux cent un
*** deux cent trente-deux
*** neuf cent quatre-vingt-dix-neuf
*** mille
*** mille un
*** dix mille
*** dix mille un
*** cent mille
*** deux millions
*** trois milliards
*** deux milliards cent quarante-sept millions
** quatre cent quatre-vingt-trois mille six cent quarante-sept
*/
}
}
You can handle "dollar and cent" conversion by calling the "convert" method two times.
String phrase = "12345.67" ;
Float num = new Float( phrase ) ;
int dollars = (int)Math.floor( num ) ;
int cent = (int)Math.floor( ( num - dollars ) * 100.0f ) ;
String s = "$ " + EnglishNumberToWords.convert( dollars ) + " and "
+ EnglishNumberToWords.convert( cent ) + " cents" ;
Another way to use a built-in function of your DBMS (if available).
For Oracle
SQL> select to_char(to_date(873,'J'), 'JSP') as converted_form from dual;
CONVERTED_FORM
---------------------------
EIGHT HUNDRED SEVENTY-THREE
SQL>
'JSP' means :
J : the Julian format.
SP : spells the word for the number passed to to_date
Converting an Integer to a Text Value in Power BI
Make sure you have the correct format string.
Try this:
= FORMAT(table1.[RegionID], "#") & " " & table1.[RegionName]
Converting an integer to a string in PHP
You can use the strval() function to convert a number to a string.
From a maintenance perspective its obvious what you are trying to do rather than some of the other more esoteric answers. Of course, it depends on your context.
$var = 5;
// Inline variable parsing
echo "I'd like {$var} waffles"; // = I'd like 5 waffles
// String concatenation
echo "I'd like ".$var." waffles"; // I'd like 5 waffles
// The two examples above have the same end value...
// ... And so do the two below
// Explicit cast
$items = (string)$var; // $items === "5";
// Function call
$items = strval($var); // $items === "5";
How do I convert numbers into text? (In mySQL)
select
case
when Yourfield = 0 then 'no'
when Yourfield = 1 then 'yes'
end as GotIt
from
collection
How to convert numbers to words without using num2word library?
Your first statement logic is incorrect. Unless Number is 1 or smaller, that statement is always True; 200 is greater than 1 as well.
Use and instead, and include 1 in the acceptable values:
if (Number >= 1) and (Number <= 19):
You could use chaining as well:
if 1 <= Number <= 19:
For numbers of 20 or larger, use divmod() to get both the number of tens and the remainder:
tens, remainder = divmod(Number, 10)
Demo:
>>> divmod(42, 10)
(4, 2)
then use those values to build your number from the parts:
return num2words2[tens - 2] + '-' + num2words1[below_ten]
Don't forget to account for cases when the number is above 20 and doesn't have a remainder from the divmod operation:
return num2words2[tens - 2] + '-' + num2words1[remainder] if remainder else num2words2[tens - 2]
All put together:
def number(Number):
if 0 <= Number <= 19:
return num2words1[Number]
elif 20 <= Number <= 99:
tens, remainder = divmod(Number, 10)
return num2words2[tens - 2] + '-' + num2words1[remainder] if remainder else num2words2[tens - 2]
else:
print('Number out of implemented range of numbers.')
convert numerical value(amount) into text angularjs
You can convert from number to words like done in this answer.
var a = ['','one ','two ','three ','four ', 'five ','six ','seven ','eight ','nine ','ten ','eleven ','twelve ','thirteen ','fourteen ','fifteen ','sixteen ','seventeen ','eighteen ','nineteen '];
var b = ['', '', 'twenty','thirty','forty','fifty', 'sixty','seventy','eighty','ninety'];
function inWords (num) {
if ((num = num.toString()).length > 9) return 'overflow';
n = ('000000000' + num).substr(-9).match(/^(\d{2})(\d{2})(\d{2})(\d{1})(\d{2})$/);
if (!n) return; var str = '';
str += (n[1] != 0) ? (a[Number(n[1])] || b[n[1][0]] + ' ' + a[n[1][1]]) + 'crore ' : '';
str += (n[2] != 0) ? (a[Number(n[2])] || b[n[2][0]] + ' ' + a[n[2][1]]) + 'lakh ' : '';
str += (n[3] != 0) ? (a[Number(n[3])] || b[n[3][0]] + ' ' + a[n[3][1]]) + 'thousand ' : '';
str += (n[4] != 0) ? (a[Number(n[4])] || b[n[4][0]] + ' ' + a[n[4][1]]) + 'hundred ' : '';
str += (n[5] != 0) ? ((str != '') ? 'and ' : '') + (a[Number(n[5])] || b[n[5][0]] + ' ' + a[n[5][1]]) + 'only ' : '';
return str;
}
$scope.totalAmount = 0;
$scope.tableindiv2.forEach(function (t) {
$scope.totalAmount += Number(t.amount);
$scope.empnameandaddress();
});
$scope.totalAmountInWords = inWords($scope.totalAmount);
In your HTML view, use totalAmountInWords instead of totalAmount.
style="font-weight:bolder; font-size:24px; float:right;">Total: {{totalAmountInWords }}</span></td>
Related Topics
Removing Wkwebview Accesory Bar in Swift
iOS Color to Transparent in Uiimage
How to Use Multiple Segues with One Uitableviewdelegate
JSON Parsing Using Nsjsonserialization in iOS
How to Remove All References for Outlet
Nsinteralinconsistencyexception - Uikeyboardlayoutalignmentview
The 'Pods' Target Has Transitive Dependencies That Include Static Binaries' When Installing Gcm
iOS Simulator Is Not Launching
Swift String Escaping When Serializing to JSON Using Codable
Locking Orientation Does Not Work on iPad iOS 8 Swift Xcode 6.2
Facebook App Requests Aren't Shown on iOS Devices
Xcode Duplicate Symbols for Architecture Error After Updating Cocoa Pods
Detect When a Unicode Character Cannot Be Displayed Correctly
How to Find Out What View a Touch Event Ended At
Handle JSON Response with Alamofire in Swift
Set<Nsobject>' Does Not Have a Member Named 'Anyobject." - Xcode 6.3